Estimate Scrubber is a no/low-cost estimating tool

  • Estimate Scrubber v2.0 provides:
  • SCRS Complete Repair Planning Guide Scrub Estimate Scrubber  &   Estimate Scrubber
  • Identifies missed core charges, blank labor hours/prices, manually entered INC * and more ....
  • Your use constitutes your acceptance of our Terms of Use
  • Free and subscription options available



To Scrub an Estimate

1. Print a PDF Audatex, CCC or Mitchell estimate.
(Only complete estimates will scrub)
2. Save the estimate to a file.
3. Click the Browse Button below.

4. Then click Scrub Estimate.
















The FREE SCRS Complete Repair Planning Guide Scrubbing is provided as a service to the industry by the Society of Collision Repair Specialists and VehicleOwnersGuide.com. We are proud to serve the Collision industry. We’re investing our many years’ experience toward creating the most efficient, reliable, and easy-to-use software to assist in reviewing collision estimates.

We do not sell your information.

As of December 15, 2014 during our beta test you can now scrub, along with the SCRS not-included operations, your estimates against 30 powerful repair rules created exclusively for the collision repair industry.

At the end of the beta test you will be able to continue to scrub, at no cost, against a starter pack of administrative, 5 miscellaneous items and 10 powerful rules along with the SCRS not-included operations.

You may also subscribe to our very low cost Premium Package which allows you to scrub over 150 items, create multiple profiles for different customer accounts and offers a form of consistency between estimators and shops that you may not currently have.

For more information please contact askBob@VehicleOwnersGuide.com.




Free / Subscription Options



Purchase Subscription       

You don't need to purchase a subscription to EstimateScrubber v2.0 to get powerful estimate review results not found in any other product. (Such as estimate identifiers, footnote and component classifications, note definitions, SCRS Complete Repair Planning review, repaired/used panels, 2 tone panels, remanufactured and recored parts, and more.)

If you upgrade you can create a personalization login to get started creating profiles and remove any use limitations of the free option. Best of all the EstimateScrubber v2.0 scrubs the printed estimate with all the notes, options and anything prined on the physical estimate. For example try reviewing for an Audatex code 40 (parts exchange searched, but not compared), checking for parts vendors on a CCC estimate, or any discontinued or exotic metal on a Mitchell estimate with any of the estimate auditing programs you are probably paying a hundred dollars a month.

You can upgrade from the free option to create unlimited review profiles and remove scrubbing limitations.

Products Free Subscriptiom
Works with Audatex Estimate PDF File
Works with CCC One PDF File
Works with Mitchell PDF File
SCRS Complete Repair Planning Guide Scrubbing
Review Profiles
Repair Checks Starter Pack
10  Popular Repair Checks
Professional Pack
Everything we Got (30 rules and growing)
  • Aim, sensors (park, backup, proximity & camera
  • A/C Evacuate & Recharge
  • Advanced Substrates, repair
  • Airbag, Deployed
  • Asterisks, overridden refinish and/or blend allowances
  • Battery, disconnect
  • Block Sand, repaired outer panels
  • Bumper, refinished on vehicle (CCC only)
  • Corrosion Protection, restore
  • Decals, Overlays, Stripe Tape
  • Discontinued Parts
  • Estimate Line Modified (CCC only)
  • Fuel Tank/Fuel Pump Module, R&I/R&R
  • Part Number ending in ZZ without Corresponding Refinish Operation
  • Glass, Urethane Set
  • Labels
  • Labor Hours, blank or zero
  • Labor Notes - Message Codes
  • Mechanical Operations Paid as Body (CCC only)
  • Part Number, Call Dealer
  • Part Price/Labor Allowance, Manually Entered Inc*
  • Parts Price/Sublet Amount, blank or zero
  • R&I Emblems, Mouldings, Nameplate, clean & retape
  • Refinish Check, part number, ending in PTM, ZZ & bumper reinforcements/impact bars
  • Refinish Setup, Underside, Second Color & Two Tone
  • Refinish, undersides of selected panels
  • Remanufactured Parts, core charges
  • Unibody/Frame, setup, pull
  • Used Part, preparation
  • Weld damage, blend/repair selected panels
Administrative Checks
  • VIN, Year, Make, Exterior Color,
  • Trim Code, Odometer, License Plate,
  • Production Date, Customer Name, Job/RO,
  • Customer Name/Address/Phone,
  • Insurer, Policy Number, Deductible,
  • Date of Loss, Claim Number, Estimated by,
  • Type of Loss, Damage Indicator, Scheduled In Date,
  • Inspection Date
Rates, Materials, Thresholds, Taxes & Discounts
  • Body, Paint, Paint Supplies,
  • Frame, Electrical, Mechanical,
  • Diagnostic, Structural, Glass,
  • Body Supplies, Sales Tax Rate, 1/2/3 Stage Paint Supplies Threshold,
  • Clear Coat Hours, Blend Hours, Refinish Hours,
  • Domestic/Foreign Parts Discount, Used/Sublet/OE Surplus Markup,
  • Glass Discount
Required Repair Operation On Estimate
  • 2 Wheel Alignment, 4 Wheel Alignment, Anti-Freeze,
  • Freon, Aim Headlamps, Evacuate & Recharge,
  • Painted Pinstripes, Pinstripes Tape, EPC Charge,
  • Storage Charge, Towing Charge, Flex Additive
More Miscellaneous Repair Operation Checks
  • Price/Labor Hours for
  • 2 Wheel Alignment, 4 Wheel Alignment, Anti-Freeze,
  • Freon, Aim Headlamps, Evacuate & Recharge,
  • Painted Pinstripes, Pinstripes Tape, EPC Charge,
  • Storage Charge, Towing Charge, Flex Additive,
  • PLUS 20 Custom Defined Items
Betterment
  • Tire, Battery, Exhaust,
  • Brakes, Suspension, Mechanical
Required Estimate Text
  • Four blocks of required estimate text.

Used/Salvage parts/Remanufactured/Aftermarket Parts Usage
  • Checks estimate for used/salvaged parts,
  • remanufactuerd parts and aftermarket parts against vehicle year
  • and mileage.
Data Pump
  • Nothing to load. Print an estimate
  • and upload to scrub.
Price $240 USD a Year










FAQ



About EstimateScrubber.com. We are completely independent from any insurers, information providers or other outside influences. Our goal is to provide outstanding free and low cost services to the collision repair industry and vehicle owners. We do not share or sell any estimates or shop information to any third party. Scrubber offers the ability to check your estimates against a preset group of items and rules to allow you the opportunity to make additions, deletions and changes before you submit it to your customers for approval. It also can offer a form of consistency between shop estimators making sure the same entries appear on all estimates

Estimate Providers. Currently the scrubber works with CCC and Mitchell estimates. We are working on the secondary providers such as AudaXplore Web-Est and CompEst. They will be available soon.

Estimates from Other Sources. You can scrub estimates from other shops or insurers as long as they are provided in a text PDF format. When doing this your shops automatic login will not work. This means you will have to manually log in to scrub the estimate.

Multiple Profiles. You may create multiple profiles for different customer types. Cloning profiles allows you to copy an existing profile and make changes thus eliminating the task of completely setting up each profile. Each profile has to have a unique name. There is a freehand text area at the beginning of each profile allowing you the add comments and/or rules about the customer. You may then scrub your estimates against different profiles looking for different things.

Scanned, Faxed or Copied Estimates. Scanned Faxed or Copied estimates will not scrub. The estimate has to be an original PDF copy. If you can get an estimate emailed to you as a PDF attachment it should scrub without any issues.

How Scrubber Works. Scrubber does not use data pumps, EMS or BMS files. It is completely cloud based. The scrubber reads the estimates text captured in the PDF file. Scrubber, using artificial neural networks (ANNs), can be trained to look for anything in the estimate copy. It is a statistical process we train, be it a line number, paint time, labor time, part number, line description, second line text, *, **, <>, #, INC*# or anything else. We program the ANNs to read and understand the lines and classify them. For a typical 50 line estimate we may need to perform thousands of pattern matches. When we are done then we apply the review logic. Since this is a statistical process it may not be 100% accurate. Occasionally you may run across a scrubbed estimate with an issue.

PDF Documents. There are two types of PDF files, Text and Graphic. Estimate scrubber needs estimates printed in a PDF text format. Any PDF program will work as long as it converts to a PDF text file. We recommend using PrimoPDF (www.primopdf.com) a free PDF text convertor. If you are having problems scrubbing an estimate (shows no output) check the PDF converter. Open an estimate up and try to highlight the text. When clicking the left mouse button and scrolling down you cannot see the text highlighted it is a graphic file. A graphic PDF file will show a box to cut and paste. If you can't highlight the PDF’s text Scrubber can't read it. Do not use the PDF printers supplied by the information suppliers as they may resize the estimate copy which will not properly scrub the file.

Scrub Complete Estimates. You must print the entire estimate as a PDF file. If you try printing a partial estimate to a PDF the scrubber may not work. When you print as a PDF file you are not using paper. It is more work the convert a partial estimate to PDF so print the estimate as a PDF file.

Scrubbing the Same Estimate Multiple Times. You can scrub an estimate as many times as you want. If necessary you can make return to the estimate, make changes, reprint it as PDF and rescrub. You can do this as many times as necessary.

Manual Entries. The number of different ways you can enter the information on a manual line is infinite. Scrubber cannot be programmed to understand all these combinations. Our recommendation is to enter manual entries using verbiage as close to the text used by the information providers.

Rule Explanations
Rule Looks For Explanation Verbiage in Scrub
Aim, sensors (park, backup, proximity & camera) Identifies lamps and/or sensors that could require specific aiming procedures Sensors are found on line/s xx. Do the sensors need to be aimed following OEM procedures?
A/C Evacuate & Recharge Flags estimates without a matching R134, R12 or Freon entry A/C Recovery & Recharge was found on line/s xx. Refrigerant was not found in the estimate. Should you add refrigerant or recover refrigerant?
Advanced Substrates, repair Flags advances substrates that are being repaired Repairing an advanced substrate was found on line/s xx. Verify they can be properly repaired and not replaced
Air Bag, deployment clean up Identifies airbag deployment that could necessitate residue cleanup Deployed Airbag was found on line/s xx. Do you need to add to clean up residue?
Asterisks, overridden refinish and/or blend allowances Identifies Audatex and Mitchell Refinish/Blend allowances that have been user modified Modified refinish and or blend line/s appear on line/s xx.
Battery, disconnect Identifies R&R and R&I of batteries which could require resetting/reprograming electronics R&I or R&R battery is found on line XX. Should you allow time to reset the electronics?
Block Sand, repaired outer panels Identifies major exterior repaired panels which could need feather, fill & block sanding Outer Panel/s were repaired in line/s xx. Do you need to add block, feather & fill to the panel/s
Bumper, refinished on vehicle (CCC only) Flags CCC estimates with bumpers refinished on vehicle (first panel for overlap purposes) Bumper refinished on vehicle found on line XX. The bumper is considered the first panel for overlap purposes and is painted in one operation with the vehicle.
Corrosion Protection, restore Flags selected R&R & repaired panels asks if restore corrosion protection has been considered Bumper refinished on vehicle found on line XX. The bumper is considered the first panel for overlap purposes and is painted in one operation with the vehicle.
Decals, Overlays, Stripe Tape Flags and notifies estimator that Decals, Stripe Tape, Overlays only have replace allowances Decals, Overlays and Stripe Tape are found on lines xx. The labor allowance refers to install time only. Consider Removal time on repaired panels.
Discontinued Parts Flags discontinued parts and notifies estimator that price is last available price from OEM OEM discontinued part/s are found on line/s xx. The price is the last available price from the OEM. Call dealer for the replacement part number and price.
Estimate Line Modified (CCC only) Flags CCC estimates with bumpers refinished on vehicle (first panel for overlap purposes) Estimate line/s xx has been modified. The part type, part number, price, labor or labor type has been changed by estimator.
Fuel Tank/Fuel Pump Module, R&I/R&R Identifies R&I/R&R fuel tank and pump. Asks if drain & refill tank should be considered Fuel Tank/Pump Module R&I/ R&R found on line/s xx. Do you want to include time to drain and refill the tank?
Glass, Urethane Set Flags R&R and R&I glass without a corresponding adhesive sealant kit Glass R&I or R&R was found on lines XX. Urethane adhesive was not found on estimate. Do you need to add urethane adhesive?
Labels Flags R&R and repaired panels that may need to have labels replaced Repaired and/or replaced parts appear on line/s XX. Do you need to replace labels?
Labor Hours, blank or zero Flags R&R and repaired panels that may need to have labels replaced There was a zero or no labor found in line/s XX
Labor Notes - Message Codes Flags selected Audatex message codes and Mitchell estimate lines with # after labor A labor note or message code applies to R&I/R&R/Overhaul line/s xx. Have you read the estimating system notes that apply?
Mechanical Operations Paid as Body (CCC only) Flags CCC estimates with a m without a corresponding M Mechanical operation/s on line/s paid at body rate. Should these lines be paid at mechanical rate?
Open Item (CCC Only) Flags CCC estimate lines that carry Open instead of a line number Line/s xx are designated as open items for two reasons. 1. Most commonly the part/s have been discontinued by the OEM. Call a dealer to confirm. 2. The item has been recorded on the estimate by the estimator as possibly damaged.
Part Number, Call Dealer Flags parts that need to be priced by dealer A call dealer note or message code appears on line/s xx. Contact the dealer for correct part number and pricing information.
Part Price/Labor Allowance, Manually Entered Inc* Identifies Audatex and Mitchell lines that have been included by the estimator User enter INC* appears on line/s xx. Should the manually overridden price or labor be included?
Parts Price/Sublet Amount, blank or zero Flags R&R & Sublet lines with blank or zero parts amounts Parts were replaced or sublet in line/s xx with no amount charged
R&I Emblems, Mouldings, Nameplate, clean & retape Flags R&I of Emblems, Mouldings, Nameplate that may need clean & retape entry added R&I of mouldings, emblems and nameplates are found on line/s xx. Do you need to allow for clean and retape?
Refinish Check, part number, ending in PTM, ZZ & bumper reinforcements/impact bars Flags part numbers ending in PTM or ZZ without corresponding refinish allowances OEM parts ending in PTM, ZZ and bumper impact bare without corresponding refinishes appear on line/s XX. Do they need refinishing?
Refinish Setup, Underside, Second Color & Two Tone Identifies selected panels that could require different paint formulations or two tone Two Tone, Underside/s and/or specific inner panel/s refinish in line/s xx . Is the color a different formula you may want to add a additional setup, tint and material.
Refinish, undersides of selected panels Identifies selected panels that may need the undersides refinished when replaced Replace and/or repair of panel/s in line/s XX. The operation may not include refinishing the inside or underside
Remanufactured Parts, core charges Identifies and flags remanufactured parts and asks if core charges have been considered Remanufactured part/s are found on line/s xx. The part price does not include core charges. Do you need to add for core charges?
Unibody/Frame, setup, pull Flags frame/unibody repairs that could necessitate repairing clamp damage Frame/Unibody repair is found on line/s XX. Is repair & refinish clamp damage necessary?
Used Part, preparation Flags LKQ/Used parts and asks if they require any additional body or refinish operations Used parts are found on line/s xx. Do these parts need additional time for detrimming. Has the part been cleaned and prepared for installation? Refinish allowances are for OEM new parts. Has the surface been brought to OEM new for refinish purposes?
Weld damage, blend/repair selected panels Flags selected welded exterior panels and asks if adjacent panel need to be repaired and/or blended Welded panel/s in line/s xx. Do you need to repair and/or blend the adjacent panels?























Terms of Use



VehicleOwnersGuide.com Web Site Terms and Conditions of Use. VehicleOwnersGuide.com , along with all its subsidiaries and affiliates ("VOG"), provides the information and services on its World Wide Web site(s) (the "Site") under the following terms and conditions. By accessing and/or using the Site, you indicate your acceptance of these terms and conditions.

LAWS AND REGULATIONS. Access to and use of this Site are subject to all applicable international, federal, state and local laws and regulations. User agrees not to use the Site in any way that violates such laws or regulations.

COPYRIGHT AND TRADEMARKS. The information available on or through this Site is the property of VehicleOwnersGuide.com ., or its licensors, and is protected by copyright, trademark, and other intellectual property laws. Users may not modify, copy, distribute, transmit, display, publish, sell, license, create derivative works or otherwise use any information available on or through this Site for commercial or public purposes. Users may not use the trademarks, logos and service marks ("Marks") for any purpose including, but not limited to use as "hot links" or meta tags in other pages or sites on the World Wide Web without the written permission of VehicleOwnersGuide.com or such third party that may own the Mark.

TAMPERING. User agrees not to modify, move, add to, delete or otherwise tamper with the information contained in VehicleOwnersGuide.com 's Web site. User also agrees not to decompile, reverse engineer, disassemble or unlawfully use or reproduce any of the software, copyrighted or trademarked material, trade secrets, or other proprietary information contained in the Site.

THIRD PARTY INFORMATION. Although VehicleOwnersGuide.com monitors the information on the Site, some of the information is supplied by independent third parties. While VehicleOwnersGuide.com makes every effort to insure the accuracy of all information on the Site, VehicleOwnersGuide.com makes no warranty as to the accuracy of any such information.

LINKS TO THIRD PARTY SITES. This Site may contain links that will let you access other Web sites that are not under the control of VehicleOwnersGuide.com . The links are only provided as a convenience and VehicleOwnersGuide.com does not endorse any of these sites. VehicleOwnersGuide.com assumes no responsibility or liability for any material that may be accessed on other Web sites reached through this Site, nor does VehicleOwnersGuide.com make any representation regarding the quality of any product or service contained at any such site.

LINKS FROM THIRD PARTY SITES. VehicleOwnersGuide.com prohibits unauthorized links to the Site and the framing of any information contained on the site or any portion of the Site. VehicleOwnersGuide.com reserves the right to disable any unauthorized links or frames. VehicleOwnersGuide.com has no responsibility or liability for any material on other Web sites that may contain links to this Site.

NO WARRANTIES. Information and documents provided on this Site are provided "as is" without warranty of any kind, either express or implied, including without limitation warranties of merchantability, fitness for a particular purpose, and non-infringement. VehicleOwnersGuide.com uses reasonable efforts to include accurate and up-to-date information on this Site; it does not, however, make any warranties or representations as to its accuracy or completeness. VehicleOwnersGuide.com periodically adds, changes, improves, or updates the information and documents on this Site without notice. VehicleOwnersGuide.com assumes no liability or responsibility for any errors or omissions in the content of this Site. Your use of this Site is at your own risk.

LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES SHALL VehicleOwnersGuide.com, INC. BE LIABLE FOR ANY DAMAGES SUFFERED BY YOU, INCLUDING ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES (INCLUDING, WITHOUT LIMITATION, ANY LOST PROFITS OR DAMAGES FOR BUSINESS INTERRUPTION, LOSS OF INFORMATION, PROGRAMS OR OTHER DATA) THAT RESULT FROM ACCESS TO, USE OF, OR INABILITY TO USE THIS SITE OR DUE TO ANY BREACH OF SECURITY ASSOCIATED WITH THE TRANSMISSION OF INFORMATION THROUGH THE INTERNET, EVEN IF VehicleOwnersGuide.com WAS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

PRIVACY. Protecting the privacy of our clients and users of our Sites is important to VehicleOwnersGuide.com. The VehicleOwnersGuide.com Web Site Privacy Statement describes how we use and protect information you provide to us.

SECURITY. Data transmitted to and from VehicleOwnersGuide.com client Sites is encrypted for the user's protection. However, the security of information transmitted through the Internet can never be guaranteed. VehicleOwnersGuide.com is not responsible for any interception or interruption of any communications through the Internet or for changes to or losses of data. User is responsible for maintaining the security of any password, user ID, or other form of authentication involved in obtaining access to password protected or secure areas of VehicleOwnersGuide.com sites. In order to protect you and your data, VehicleOwnersGuide.com may suspend your use of a client site, without notice, pending an investigation, if any breach of security is suspected.

TRANSMISSION OF PERSONAL DATA. User acknowledges and agrees that by providing VehicleOwnersGuide.com with any personal information through the Site, User consents to the transmission of such personal user information over international borders as necessary for processing in accordance with VehicleOwnersGuide.com's standard business practices and the VehicleOwnersGuide.com Web Site Privacy Statement.

ACCESS TO PASSWORD PROTECTED/SECURE AREAS. Access to and use of password protected and/or secure area of the Site is restricted to authorized users only. Unauthorized access to such areas is prohibited and may lead to criminal prosecution.











About Us



Web Based Solutions for Collision Repairers

VehicleOwnersGuide.com was founded in 2009 in San Diego, California by industry professionals. It is a portal where owners can receive a free guide to the repairs done to their vehicles. The portal provides consumer friendly information leading to more satisfied owners.

Vehicle information is obtained by providing Software as a Service (SAAS) repair scrubbing and claims management to repairers and insurers.

EstimateScrubber.com is a SAAS where repairers can at no cost scrub and upload repair estimates which in turn can used to create personalized Consumer Estimates for vehicle owners. Over 20,000 unique repairers have visited the scrubber. The site uses the Society of Collision Repair Specialists (SCRS) Complete Repair Planning Guide and provides the scrubbing results in English and Spanish.

OpenClaimsGateway.com is a full feature claims management SAAS insurers can use to manage the claims process. The system contains unique features such as adjuster assignment transfers, estimate translations, full compliance review of printed estimates, plus standard features such as assignment, work-flow management, KPI and estimate review. It also has the ability to seamlessly work with any in or out of network repairer in seconds.



































Contact Us



Let us know what you think about the Scrubber, tell us what you think is good or bad and what else you would like to see in the new EstimateScrubber v2.0.

  • Email:

  • Name:

  • Shop:






































Become a Scrubber Sponsor



  • Do you sell goods or services to collision repairers?
  • Are you doing all you can to support those customers?
  • Need a way to foster loyalty and differentiate yourself from competitors?

Why consider sponsoring Scrubber v2.0.
  • There is nothing else like it on the market, paid or free
  • Its Free
  • Its used in training classes by major refinish companies
  • It draws 10-12 thousand unique visitors a year
  • Version 1.0 was developed in conjunction with the SCRS Complete Repair Planning Guide.
  • v2.0 goes far beyond 1.0, is a major enhancement, a year in development.
  • v2.0 can be personalized by repairers
  • v2.0 places vendor specific information in front of scrubber users where it is most valuable - When scrubbing an estimate
  • v2.0 is a repairer tool, not compliance auditor, that is able to read the pritned estimate, its the only tool that can do that for all 3 estimating platforms
  • v2.0 is a compliment to estimating systems, providing userful estimator information, prompting and estimate review


For rate information contact

  • Steven Siessman
  • VehicleOwnersGuide.com
  • PO 261084
  • San Diego, CA 92196
  • steven.siessman@vehicleownersguide.com
  • 858 222-0053